紀要論文 CFRPの積層構成が機械的性質に及ぼす影響について
CFRP ノ セキソウ コウセイ ガ キカイテキ セイシツ ニ オヨボス エイキョウ ニ ツイテ
Influence of Laminate Configuration for Carbon Fiber Reinforced Plastic on Mechanical Properties

関野, 晃一  ,  荒井, 悠一郎||アライ, ユウイチロウ

59pp.21 - 25 , 2016-03 , 関東学院大学工学会
ISSN:03685373
NII書誌ID(NCID):AN00045764
内容記述
This paper describes the effect of the cross-ply and angle-ply lamination configuration for carbon fiber reinforced plastic (CFRP) plates on the mechanical properties. The measured mechanical properties were the tensile stress, Young's modulus, Poisson's ratio and stress intensity factor. For the cross-ply laminated plate, the tensile stress decreased significantly as the fiber angle was increased from 0 to 45°. However, for the angle-ply plate, there was no dependence of the tensile stress on the fiber angle. Moreover, for the cross-ply plate, the stress intensity factor decreased with increasing fiber angle. On the other hand, for the angle-ply plate, the stress intensity factor was independent of the fiber angle in the ranges between 0° to 45°, except for a decrease at 22.5°. Consequently, the results of this study indicated that the mechanical properties of the angle-ply laminated plate were largely unaffected by the fiber angle.
本文を読む

http://library.kanto-gakuin.ac.jp/e-Lib/bdyview.do?bodyid=NI30001054&elmid=Body&lfname=link/004.pdf

このアイテムのアクセス数:  回

その他の情報